The Dell Axim has slightly different setup procedures than the HP iPAQs. The following document will walk you through setting up a Bluetooth device.

On your Dell:

1) Ensure the Anywhere Map™ program is not running (Shutdown-Concern)

2) Tap the Bluetooth icon in the lower right-hand corner of the screen

3) Ensure the “Turn on Bluetooth” check box is selected

4) Now touch the “Devices” tab at the bottom of the screen

5) Tap the “New Partnership” button

(the program will then pause for a moment as it scans for nearby Bluetooth devices)

6) Now select Bluetooth GPS or Weather Box you want to use

7) Press the “Next” button at the bottom of the screen

8) Enter the Pin code for your device

 Sentinel Blue GPS is generally “0000” (fours zeros, not the letter O)

 Garmin10 GPS is generally “1234”

 Anywhere Tracker GPS is generally “0” or “default” or “0000” (all zeros are zeros and not the letter O)

 WX – XM Weather Box is generally “0” (a single zero) or “9679”

9) Ensure the “Serial Port” checkbox is selected

10) Tap the “Finish” button at the bottom of the screen

11) Now press the “COM Ports” tab at the bottom of the screen

12) Select the “New Outgoing Port” button

13) Tap the GPS or Weather Box ID

14) Select the desired COM port

 GPS is generally the COM8 port

 Weather Box is generally the COM7 port

15) Ensure the “Secure Communications” checkbox is unselected

16) Tap the “Finish” button at the bottom of the screen

17) Click on the “OK” button in the top right-hand corner of the screen

Now you can enter AnywhereMap and change the settings to match the new COM ports.

Questions applicable to this article:

- How do I setup my Axim to use a Bluetooth device?

- My GPS / WX Box doesn’t work on my Dell. How do I configure these devices?

- How do I setup my Dell to have devices on certain COM ports?

- I’ve always had iPAQs, how do I configure Bluetooth devices on a Dell?