Resolution: It is recommended that after exiting all programs and returning to the Main System Screen, the Lock icon is pressed, then and hold power button for 10 seconds. This will ensure that in the event the ATC is powered on accidentally, it will power off within 3 minutes if the Unlock>Yes sequence is not completed, to conserve the battery.
ATC Hardwired Power Supply
The ATC hardwired power supply has 2 leads, one has a white stripe on it while one does not. The wire with the white...
(No rating)
9-10-2009
Views: 3593
Wired XM unit will not connect to iPAQ
Situation: AnywhereWx software will not connect to a wired XM unit (wire from power plug uses silver barrel connector...
(No rating)
6-06-2005
Views: 5764
How do I set the backlight/power settings?
Power on the ATC. Navigate to the main System Screen (PP/AWM/HP).Launch HP Street Navigation.To set the Power...
(No rating)
12-22-2009
Views: 3156
Power requirements for Pro System
12v System: 10.8-16V
28v System: 22-30V
Power to the AW160 power supply must be within the above ranges to...
(No rating)
5-20-2011
Views: 668
Glossary
Anywhere Map for PDAs
Anywhere Travel Companion (ATC)
Email
Print
Add Comment
11-15-2004
Views: 19866