iPAQ 4700 won't power up or soft reset .: Anywhere Map Support

iPAQ 4700 won't power up or soft reset

If the iPAQ 4700 will not power up using the power switch and/or it will not soft reset, the first thing you should check is the battery door locking switches. The battery door lock is also a power interlock switch.

Looking at the bottom of the iPAQ, the battery door lock is to the lower left of the plug receptacle and the battery door release is to the lower right. If you have removed the battery, the release will automatically snap and hold the battery in place upon reinsertion and the battery will not fall out. However, UNLESS THE BATTERY LOCK SWITCH IS MOVED TO THE LEFT (LOCKED) POSITION, THE iPAQ WILL NOT START.

Simply move the battery lock switch to the left and the iPAQ will start normally.

Article	002
Created	11-15-2004
Modified	4-25-2006
Author	Jay Kramer
Rating

iPAQ 4700 overheating
Situation: iPAQ 4700 overheating and shutting down Description: During hot days, the 4700 iPAQ can warm up to the...

7-06-2005 Views: 6546

Date/Time reset after power off
When you power off the Quadra it is normal for the date and time to set back to an earlier date/time. There are 3...

8-18-2010 Views: 219

Setting up the HP4700 iPAQ
iPAQ 4700 Special operating notes:For users of the new iPAQ 4700 series, there are some significant issues to...

11-12-2004 Views: 33006

Step by Step Backup & Restore for the iPAQ 4700 Series PDA
Depending on the battery age and the power management features of the hand held unit, every PDA has the potential to...

3-07-2006 Views: 3273

ATC Hardwired Power Supply
The ATC hardwired power supply has 2 leads, one has a white stripe on it while one does not. The wire with the white...
(No rating) 9-10-2009 Views: 1491

User Comments

Add Comment

Russell Munson
4-01-2006 at 7:04pm

Thank you very much for this information. I can't tell you how much trouble you have saved me.

not importatnt
7-06-2005 at 11:21am

THANK YOU!!!!

with a small hint you saved A LOT OF WORK for me!! thank you, thank you!!!!

Daveo
1-30-2005 at 4:05am

Thanks!

Thanks for the tip! My 4700 wouldn't switch OFF or soft reset. Turned out the battery lock had slipped half off. Clicked it back to lock and all is well :) I was getting worried there for a while.

Joe Garner
12-09-2004 at 10:55pm

iPaq wont power up or soft reset

This is a bad design. Just bumping the switch will turn it off. I took a sharp knife and trimmed the switch flush with the case so it cant be turned off by mistake.

HTH, Joe

iPAQ 4700 won't power up or soft reset

Related Articles

User Comments