Anywhere Map Logo top 1-800-292-1160
Search  
   
Browse by Category
Glossary   
Anywhere Map Support .: Anywhere Travel Companion (ATC) .: ATC Hardwired Power Supply

ATC Hardwired Power Supply

The ATC hardwired power supply has 2 leads, one has a white stripe on it while one does not.

The wire with the white stripe is Positive.

The wire without the stripe is Ground.


How helpful was this article to you?

Related Articles

article Power off unit
Issue: ATC does not turn off.Resolution: It is recommended that after exiting all programs and returning to the Main...

(No rating)  7-10-2009    Views: 3340   
article ATC doesn't take or hold charge
Issue: The ATC does not charge or the battery doesn't last even 2 hours.Resolution: Only power the ATC using the...

  7-10-2009    Views: 5386   
article iPAQ 4700 won't power up, soft reset, sync or charge
If the iPAQ 4700 will not power up using the power switch and/or it will not soft reset, the first thing you should...

  11-15-2004    Views: 19866   
article How do I set the backlight/power settings?
Power on the ATC. Navigate to the main System Screen (PP/AWM/HP).Launch HP Street Navigation.To set the Power...

(No rating)  12-22-2009    Views: 3156   
article Date/Time reset after power off
When you power off the Quadra it is normal for the date and time to set back to an earlier date/time. There are 3...

  8-18-2010    Views: 2056   

User Comments

Add Comment
No comments have been posted.


Copyright © 2011 by Control Vision Corp.