No GPS or No Com on 59xx
|
Common Reasons: TomTom is running in the background, GPS Settings in Anywhere Map are incorrect or the GPS Settings in the PDA system menu are incorrect. Fix: Close Anywhere Map and verify the GPS icon on the Today page is not blue (meaning in use), if it is blue press the soft reset button on the side of the unit, open Anywhere Map and check for GPS connection. If no connection, click File>Settings>GPS Settings, set Com port to Serial cable on Com 1, data rate to 9600 and all boxes unchecked except Lock hdg>Done. If still no GPS, close Anywhere Map go to Start>Settings>System Tab>GPS. Set Program port to None, set Hardware port to None and 9600, uncheck the Manage Automatically>OK. |
|
Related Articles
|
Can I utilize an external GPS with the ATC?
The ATC can not utilize an external GPS either via bluetooth or hardwired cables. You can use an external GPS antenna... ![]() ![]() ![]() ![]()
7-10-2009
Views: 3790
|
|
What is the maximum speed of the internal GPS?
The ATC's internal GPS receiver can accurately track the aircraft position up to 250 knots. (No rating) 7-10-2009 Views: 2333 |
|
GPS Setup Instructions 47xx/55xx
Configuring the GPS HP 4700, 5500 or older HP PDAs using Bluetooth Look in the lower right corner of the PDA... (No rating) 12-02-2011 Views: 1186 |
|
No SAT or GPS takes more than 1 minute to acquire
Power on the ATC (not plugged into power supply)Tap the reset button and allow the ATC to return to the Main System... ![]() ![]() ![]() ![]()
11-11-2009
Views: 2512
|
|
External GPS for APPLE
If your iPad does not have an internal GPS in the unit, there is a way to get GPS connection to Anywhere Map Freedom.... (No rating) 4-16-2012 Views: 201 |
User Comments
Add Comment
No comments have been posted.

Anywhere Map Freedom
HP / Compaq
Glossary
Email
Print

