Instructions for replacing the AW16.stt (Settings) file:
Power on the ATC & make sure it's on the main '3-button screen' & unlocked, then connect it to your computer.
Download the following file & save it to your computer's 'desktop' screen for easy access: http://controlvision.com/support/aw16.stt
Right-click on the AW16.stt file you just saved to your desktop & select "Cut".
Open 'My Computer' & locate the "ATCMAP", "ATCSD", or "Removable Disk" drive corresponding to the SD card; open that drive, then the "DAT" folder listed there, & PASTE the file here, overwriting/replacing the existing copy.
Once you've pasted the file, right-click on it & select "COPY", then browse to the "TFAT" drive & open the "Control Vision" folder & paste the file here, again overwriting/replacing the existing copy.
Once you've completed the above steps, use the "USB Safe Removal" tool to eject the ATC device, then physically disconnect the USB cable & wait for the unit to return to the main '3-button screen', launch Anywhere Map & verify that the views are now correctly displayed.