How do I Pair/Unpair a weather receiver with an ATC?
Unpairing from current receiver:
Open AWM> Tools> Settings> XM Settings Tap on Forget Saved Bluetooth Radio> Yes> Ok Tap on Disable XM WX
Pair with a new receiver:
Power on the new receiver Tap on Tools> Settings> XM Settings Tap on Enable XM WX Anywhere Map will search for a BT enabled weather receiver Tap on Yes to Auto connect in the future
Bluetooth Passkey/Pairing Codes
Issue: Passkey/Pairing code is requiredResolution: The following are some common passkey/pairing codesXM Weather...
7-10-2009
Views: 5145
XM Weather Receiver with Audio
Anywhere XM WX is an integrated moving map navigation and color aviation weather information system using the XM...
(No rating)
10-21-2007
Views: 8321
Outside Airplane antennas for weather
If you are interested in mounting an outside antenna for optimal satellite reception at all times for your XM...
(No rating)
8-14-2011
Views: 887
XM Receiver Activation Status and Re-Activation
Issue: XM Weather Status Changes to ACTXM (Activate XM) Description: The XM Weather status may change from ERROR or...
1-23-2006
Views: 10651
Weather Configuration 5915
Configuring the XM weather receiver1. Plug the XM unit into strong 12v-32v DC power (good power is critical!)2. Start...
(No rating)
12-02-2011
Views: 279
Glossary
Anywhere Map for PDAs
Anywhere Travel Companion (ATC)
Email
Print
Add Comment
1-23-2006
Views: 10651