Browse by Category
Glossary
Like Us On Facebook

Search Knowlegebase Articles
 


Power Settings for the PDA Screen

Most handhelds will turn off their display or their backlight if no activity is detected for a certain period of time. In rare cases the PDA will not allow the backlight or the display to return, even if the screen is tapped and keys are pressed. To control both of these settings, please complete the following steps:

1) Click the Start | Settings

 

 

2) Tap the “System” tab at the bottom of the screen

 

3) Next, click on the Backlight icon

 

The “Battery Power” section controls the handheld when running on the battery.

To completely stop the unit from turning off the backlight or the display while running in battery mode, uncheck the first checkbox. (Please note the backlight uses more power and your PDA battery may not last as long)

  

To change the amount of time before the unit turns off the backlight or display, while running in battery mode, ensure the first checkbox is checked and tap the dropdown box to the right of the first check box.

 

The bottom checkbox allows the unit to turn on the display or backlight when the screen is tapped or a key is pressed. We recommend having this option checked.

 

4) Now you can click on the AC Power tab at the bottom of the screen

 

The “AC Power” section controls the unit when powered by an active AC power source.

To completely stop the unit from turning off the backlight or the display while running in AC mode, uncheck the first checkbox. We recommend having this option un-checked.

 

To change the amount of time before the unit turns off the backlight or display, while running in AC mode, ensure the first checkbox is checked and tap the dropdown box to the right of the first check box.

 

  

The bottom checkbox allows the unit to turn on the display or backlight when the screen is tapped or a key is pressed. We recommend having this option checked.

 

 

Questions applicable to this article:

- Why does my screen go dark and not return to bright when I tap on the screen?

- Why does my screen go dark every few seconds?

- How can I increase the amount of time before my PDA turns off its backlight?

- My PDA won’t turn on the backlight when I tap the screen or press a key.

Email    Print    Add Comment

How helpful was this article to you?

Related Articles

article ATC stuck on "HP Invent" screen >3 minutes
Press the 'Reset' button in lower right corner of the device with the stylus; the ATC's screen will go black...

  10-01-2009    Views: 5596   
article Power off unit
Issue: ATC does not turn off.Resolution: It is recommended that after exiting all programs and returning to the Main...

(No rating)  7-10-2009    Views: 3703   
article How do I set the backlight/power settings?
Power on the ATC. Navigate to the main System Screen (PP/AWM/HP).Launch HP Street Navigation.To set the Power...

(No rating)  12-22-2009    Views: 3563   
article Screen resolution is not correct
Go to My Computer>C Drive>DLFiles and launch tabletscreenfix.exeIf the file is not listed it may be downloaded...

  11-11-2009    Views: 2097   
article ATC Hardwired Power Supply
The ATC hardwired power supply has 2 leads, one has a white stripe on it while one does not. The wire with the white...

(No rating)  9-10-2009    Views: 4092   

User Comments

Add Comment
No comments have been posted.